- 您现在的位置：买卖IC网 > Sheet目录1210 > DLP-HS-FPGA2 (DLP Design Inc)MODULE USB ADAPTER FOR FT2232H
APPLICATIONS :
?
?
?
?
?
Rapid Prototyping
Educational Tool
Industrial/Process Control
Data Acquisition/Processing
Embedded Processor
1.0 INTRODUCTION
The DLP-HS-FPGA module is a low-cost, compact prototyping tool that can be used for rapid proof of
concept or within educational environments. The module is based on the Xilinx Spartan? 3A and
Future Technology Devices International’s FT2232H Dual-Channel High-Speed USB IC. The
DLP-HS-FPGA provides both the beginner as well as the experienced engineer with a rapid path to
developing FPGA-based designs. When combined with the free ISE? WebPACK ? tools from Xilinx,
this module is more than sufficient for creating anything from basic logical functions to a highly
complex system controller.
As a bonus feature, one channel of the dual-channel USB interface is used to load user bit files
directly to the SPI Flash—no external programmer is required. This represents a savings of as much
as $200 in that no additional programming cable is required for configuring the FPGA. All that is
needed to load bit files to the DLP-HS-FPGA is a Windows software utility (free with purchase), a
Windows PC and a USB cable. The module can also be programmed from within the Xilinx ISE tool
environment using a Xilinx programming cable (purchased separately).
The DLP-HS-FPGA is fully compatible with the free ISE? WebPACK? tools from Xilinx. ISE
WebPACK offers the ideal development environment for FPGA designs with HDL synthesis and
simulation, implementation, device fitting and JTAG programming.
The DLP-HS-FPGA has on-board voltage regulators that generate all required power supply voltages
from a single 5-volt source. Power for the module can be taken from either the host USB port or from
a user-supplied, external 5-volt power supply via an onboard standard barrel connector.
Connection to user electronics is made via a 50-pin, 0.9-inch wide, industry-standard 0.025-square
inch post DIP header on the bottom of the board and a 26-pin, 0.05-inch wide top side 2x13 header.
The bottom side 50-pin header provides access to 41 of the FPGA user input/output pins. The top
side header provides access to 22 of the FPGA user input/output pins. The bottom side header mates
with a user-supplied, standard, 50-pin, 0.9-inch spaced DIP socket. The top side header mates with a
Rev. 1.7 (May 2011)
2
? DLP Design, Inc.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
DLP-IOR4
MODULE LATCHING-RELAY 4-CH
DLP-TEMP-G
MODULE DATA-ACQUISITION 3-CH
DLP-TXRX-G
MODULE USB-TO-TTL SRL UART CONV
DLP-USB1232H
MODULE USB-TO-UART/FIFO HS 18DIP
DLP-USB232M-G
MODULE USB-TO-TTL SRL UART CONV
DLP-USB232R
MODULE USB-TO-SRL UART 18-DIP
DLP-USB245M-G
MODULE USB-TO-TTL PARL FIFO CONV
DLP-USB245R
MODULE USB-TO-PARL FIFO 18-DIP
相关代理商/技术参数
DLP-HS-FPGA3
功能描述:可编程逻辑 IC 开发工具 USB-to-FPGA Development Module
RoHS:否 制造商:Altera Corporation 产品:Development Kits 类型:FPGA 工具用于评估:5CEFA7F3 接口类型: 工作电源电压:
DLP-HS-FPGA-A
功能描述:FPGA Embedded Module Spartan-3A, XC3S200A FT2232H 66MHz 32MB 制造商:dlp design inc. 系列:FPGA 零件状态:有效 模块/板类型:FPGA，USB ?? 核心处理器:Spartan-3A，XC3S200A 协处理器:FT2232H 速度:66MHz 闪存大小:- RAM 容量:32Mb 连接器类型:USB - B，引脚接头 大小/尺寸:3" x 1.2"（76.2mm x 30.5mm） 工作温度:0°C ~ 70°C 标准包装:1
DLP-IO14
功能描述:数据记录与采集 14-Channel Data-Acq Module
RoHS:否 制造商:Lantronix 描述/功能:Analog device server 显示器类型:None 电流额定值:
DLP-IO16
功能描述:界面模块 USB/Micro Dev Board
RoHS:否 制造商:4D Systems 产品:Serial Converters 通道/端口数量: 数据速率: 接口类型:USB, UART 工作电源电压:3.3 V, 5 V 最大工作温度:
DLP-IO20
功能描述:数据记录与采集 USB-BASED 20-CHANNEL DATA ACQUISITION MOD RoHS:否 制造商:Lantronix 描述/功能:Analog device server 显示器类型:None 电流额定值:
DLP-IO26
功能描述:开发板和工具包 - PIC / DSPIC USB/Micro Dev Board
RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DLP-IO8
功能描述:界面模块 USB-BASED 8-CHANL DATA ACQUSITION MODL
RoHS:否 制造商:4D Systems 产品:Serial Converters 通道/端口数量: 数据速率: 接口类型:USB, UART 工作电源电压:3.3 V, 5 V 最大工作温度:
DLP-IO8-G
功能描述:数据记录与采集 USB-BASED 8-CHANL DATA ACQUSITION MODL RoHS:否 制造商:Lantronix 描述/功能:Analog device server 显示器类型:None 电流额定值: